Step 2
Assemble the front Stability Feet (IA-1101) onto the A-Frame (IA-2500)
Feet may come pre-assembled.
• Steady both sides of the A-Frame so that the legs will not swing open and turn the A-Frame
so that the base points upwards. This will give you downward leverage to secure the Stability
Feet (Figure 4).
• Determine which is the Right and Left Stability Foot by the imprinted letters “R” and “L”,
found on each foot. You will place each foot on the frame legs so that the letters face inward
towards each other.
• Select the Stability Foot labeled “R” on the inside and insert it on the RIGHT side of the
A-Frame (Figure 4).
• Repeat with the Stability Foot labeled “L” on the LEFT side (Figure 4).
• Open the A-Frame on the floor (Figure 6) and make sure the Spreader Arms are locked
open.
• Familiarize yourself with the Front, Back, Left and Right of the A-Frame. You may want to
refer back to this diagram for reference throughout the assembly process.
Right
Left
FIGURE 4
FIGURE 5
Back
Front
2
1
Right
Left
FIGURE 6
2
Crossbar
Spreader Arms
1