Teeter 600ia Assembly Instructions Manual Download Page 6

WARNING LABEL PLACEMENT

Important:  Please review all labels and supporting materials before using your inversion table.

We hope you enjoy your new Teeter Hang Ups Inversion Table!

If you have any questions, please contact our Customer Service Department at 1.800.847.0143 or www.teeter-inversion.com.

This drawing indicates the locations of the warning 

labels found on your product. 

If a label is missing, illegible or is removed, 

contact Customer Service at the phone number or 

website found at the bottom of this page to request a 

complimentary replacement label.

Note: Image and labels below not shown actual size. 

 

WARNING

 - To reduce the risk of personal injury or death:

• 

Read and understand all the instructions before using the inversion table.

It is your responsibility to familiarize yourself with the proper use of the 

equipment and the inherent risks of inversion, such as falling on your head 

or neck, pinching, entrapment or equipment failure.

• 

Do not allow children to use the machine. 

• 

Keep children, bystanders, and pets away from the machine while in use. 

• 

Keep body parts, hair, loose clothing and jewelry clear of all moving parts. 

• 

Height/Weight capacity: 4 ft 8 in - 6 ft 6 in (142-198 cm); 300 lbs (136 kgs).

• 

This product is for consumer, indoor household use only. 

Replace Labels and Owner’s Manual if Damaged, Illegible, or Removed.

Teeter, 9902 162nd St. Ct. E., Puyallup, WA 98375

Toll Free (Phone): 800-847-0143   Web: www.teeter-inversion.com

WARNING

!

  

EP-1737 0911-3

WARNING

!

IA-2007 0611-1 

Ankles must be properly 

secured before use.

 

REPLACE LABEL

IF DAMAGED, ILLEGIBLE,

OR REMOVED.

  

WARNING

!

E6-1740 0711-0 

Do not use Setting A

for users over

220 lbs (100 kgs).

 

REPLACE LABEL

IF DAMAGED, ILLEGIBLE,

OR REMOVED.

  

!

  WARNING

TIPPING HAZARD: For upright storage, leave A-Frame open wide enough 

to remain stable, or secure to the wall to prevent tipping. In households with 

small children, the table should be stored flat on the floor, not upright. 

NX-1720 0910-2

REPLACE LABEL IF DAMAGED, ILLEGIBLE, OR REMOVED.

Summary of Contents for 600ia




















Reviews: