
Step 4
Attach the Table Bed (F1-1300) to the A-Frame (IA-2500)
• Pick up the Table Bed, holding each side near the Roller Hinges, and stand in front of the
A-Frame where the Crossbar is located (refer to Figure 6 to determine A-Frame Front).
• Lower each Roller Hinge Pivot Pin into the A-Frame hinge plates, one side at a time
(Figures 11 and 11A).
NOTE: You may need to push outward on the A-Frame in order for the second Pivot Pin
to lock in place.
• Make sure that each Pivot Pin is seated at the base of the slot of the Hinge Plate (Figure 12).
• Ensure that the Self-Locking Hooks have closed over both Pivot Pins, and that the Table
Bed rotates smoothly.
WARNING
!
Failure of the Self-Locking Hooks to close over both Roller Hinge
Pivot Pins is an indication of improper assembly and if not corrected
could result in serious injury or death!
2
Self-Locking Hook
Roller Hinge Pivot Pin
1
2
FIGURE 11
FIGURE 11A
FIGURE 12
1
1
2
2
Roller Hinge
Self-Locking Hook
1