
Step 7
Assemble the Traction Support
TM
Handles (IA-1670) to the A-Frame (IA-2500)
Bolts/Nuts may come pre-assembled in the Handles. Simply unscrew to remove.
• Insert the Left and Right handles into the A-Frame (Figure 17), so that the long part of the
handles are parallel with the rear legs of the A-Frame.
• Insert the Bolt (IA-1148B) from the inside through the Hinge Plate into the Handle.
Hand tighten with the nut on the outside of the Hinge Plate (Figure 18).
• Secure using the 10/13mm Wrench (F5-1088) provided, being careful not to overtighten.
• Repeat on the other side.
Attach the Hinge Covers (F1-1250) to the Hinge Plates
Allen Bolts may come pre-assembled in the Hinge Covers. Simply unscrew to remove.
• Align the Left and Right Hinge Covers with the corresponding shape of the Hinge Plate on
either side of the A-Frame (Figure 19).
• Insert two (2) Allen Bolts (F5-0071) through the Hinge Plate into the Hinge Cover.
• Tighten with the Allen Wrench (IA-1149) provided, being careful not to overtighten.
• Repeat on the other side.
FIGURE 17
FIGURE 18
1
2
FIGURE 19
2
Allen Bolts
Hinge Cover
1