Step 1
Assemble the Table Bed (F1-1300) and Bed Frame Extension (F1-1380)
NOTE: This assembly will be referred to as Table Bed (
F1-1300
) for the remainder of
the Assembly Instructions.
• Locate the following items to assemble the FitFlex Table Bed:
Upper Portion (F1-1300A)
Lower Portion & Frame (F1-1300B)
Bed Frame Extension (F1-1380)
Bolts & Nuts (F1-1390)
5mm Allen Wrench (IA-1149)
10/13mm Wrench (F5-1088)
• Lay the Upper Portion (F1-1300A) face down on the floor.
• Place the Lower Portion & Frame (F1-1300B) face down on top of the Upper Portion and
align the bolt holes (Figure 1).
• Reaching underneath, insert the longest of the three bolts into the Center hole and
hand-tighten with a Nut.
• Reaching underneath, insert one of the shorter bolts through a Top hole in the Upper
Portion and hold in place. Slide one of the Bed Frame Extension loops over the Bolt and
hand-tighten with a Nut (Figure 2).
• Repeat with the remaining side (Figure 3).
• To fully tighten all three nuts to the bolts, insert the 5mm Allen Wrench (IA-1149) into the
Bolt heads and tighten the Nuts using the 10/13mm Wrench (F5-1088).
FIGURE 1
Upper Bolts (2)
Lower Bolt (1)
FIGURE 3
1
2
Upper Bolts (2)
FIGURE 2
2
Loop
Bolt
1