14
TS1001 Touch Screen Arming Station Installation Manual
1-
RTE (Egress) Control
The RAS is fitted with an Egress (Exit) terminal labelled INPUT (Figure 6 on page
10). When connected to a simple push button, the open collector terminal
labelled RELAY may be used to control a door relay.
This option is enabled by default, and should be disabled if not used.
2-
Tamper Control
The RAS is fitted with a tamper switch (Figure 3 on page 5, item 3). The tamper
m
ust be sealed (or the tamper function deactivated) to avoid “RAS Tamper”
messages during operation.
This option is enabled by default, and should be disabled if not used.
3-
Scramble Keypad
The touch screen can become worn or dirty over the buttons where a particular
digit or PIN is used frequently. The scramble keypad option moves the numbered
buttons to different positions after every login to avoid providing visual clues to
the numbers used.
This option is disabled by default.
4-
Open Button
The Hom
e screen’s optional Open button (Figure 2 on page 2, item 3) is used to
open the RAS’s door. If disabled, the Open button does not display on the Home
screen.
5-
Classic Button
The Home screen’s optional Classic button (Figure 2 on page 2, item 4) is used
to select Classic mode of operation. If disabled, the Classic button does not
display on the Home screen.
6-
Automation Button
The Home
screen’s optional Automation button (Figure 2 on page 2, item 7) is a
‘quick control’ shortcut to User menu option 24-Automation Control.
Note:
Quick control does not require user authentication via PIN. We
recommend that control be assigned to a specific RAS (in a secure area) via
automation zone programming in order to help prevent unauthorised use.
If disabled, the Automation button does not display on the Home screen.
