4
TS1001 Touch Screen Arming Station Installation Manual
Installing the RAS
Notice!
A qualified service person, complying with all applicable codes, should
perform all required hardware installation.
Installation requirements
Technician qualifications:
Only trained Challenger installation technicians
should plan the programming of Challenger systems. Technicians must comply
with and be trained in security and electrical industry installation regulations, as
appropriate to this device.
Product contents
Table 1: TS1001 Touch Screen Arming Station shipping list
Quantity Item
1
TS1001 Touch Screen Arming Station
2
3-way screw terminal blocks
1
Ring terminal and M3 screw
2
M2.5 x 6mm Phillips head screws
1
Plasterboard mounting bracket
2
6 gauge x 20mm self-tapping Phillips head screws
1
TS1001 Touch Screen Arming Station User Manual
1
TS1001 Touch Screen Arming Station Installation Manual
Inspect the package and contents for visible damage. If any components are
damaged or missing, do not use the unit; contact the supplier immediately. If you
need to return the unit, you must ship it in the original box.
Mounting the RAS
The RAS may be mounted to a wall in the following manners:
• Surface mounted using mounting holes in the back of the RAS. For surface
mounting use either the rear cable entry (Figure 3 on page 5, item 11) or the
top cable
entry (Figure 3 on page 5, item 2). See “Mounting on a surface” on
page 6.
• Flush mounted into a prepared cavity. For flush mounting use the rear cable
entry (Figure 3 on page 5, item 11). See
“Flush mounting in a cavity”
on page 6.
