93
(33) Multi-Function Analog Output (Terminal AO1) Selection (Sn-33)
(34) Multi-Function Analog Output (Terminal AO2) Selection (Sn-34)
•
The multi-function analog output can be set to monitor the following 12 status
items as shown below
：
Description
Sn-33, Sn-34
Setting
Monitored contents
Input
Output
00
Frequency Command
0 ~ max. frequency
01
Output Frequency
0 ~ max. frequency
02
Output Current
0 ~ rated current
03
Output Voltage
0 ~ rated voltage
04
DC Voltage
220V class 0~400V
440V class 0~800V
05
VIN Analog Command
0 ~ 10 V
06
AIN Analog Command
4 ~ 20 mA
07
AUX Analog Command
0 ~ 10 V
08
PID Input
0 ~ max frequency
09
PID Output1
0 ~ max frequency
10
PID Output2
0 ~ max frequency
11
Comm. Control
0~100%
*1
0~10V
Note : *1: when the setting of Sn-33~34=’11’, the multi-function output terminals AO1, AO2 are
controlled through RS-485 port either by MODBUS or PROFIBUS protocol. Please refer to
“7200MA RS-485 MODBUS/PROFIBUS Application Manual”
•
The output gain (Bn-14 and Bn-15) will determine the output voltage at multi-
function analog output at AO1, AO2 terminal. The specified multiple of 10V will
correspond to the 100% output monitored value.
(35) Pulse Output Multiplication-Gain Selection (Sn-35)
•
If the multi-function output terminal (DO1) be set as pulse output (when Sn-31 or
Sn-32= 14),the final output pulse frequency is the multiple (according to Sn-35) of
the inverter output frequency. Refer to Fig. 46 for pulse signal output.
•
Ex1 : when Sn-35= 0, the inverter output frequency is 60Hz, the output pulse
frequency is 60 Hz (duty = 50%).
•
Different settings of Sn-35 and their corresponding multiple numbers as shown
below :
Sn-35 setting
Pulse output frequency
Applicable freq. range
0
1F
：
1
×
inverter output frequency
3.83
∼
400.0Hz
1
6F
：
6
×
inverter output frequency
2.56
∼
360.0Hz
2
10F
：
10
×
inverter output frequency
1.54
∼
210.0Hz
3
12F
：
12
×
inverter output frequency
1.28
∼
180.0Hz
4
36F
：
36
×
inverter output frequency
0.5
∼
60.0Hz
Summary of Contents for speecon 7200ma
Page 1: ......
