MA7200 PLUS Operating Manual
TECO – Westinghouse Motor Company Un-12 – Un-31 Parameter Details
Un-32 -
EPROM software version
The parameter will specify the version of software that is currently used in the inverter.
Un-33 -
Motor Speed While PG Feedback Is Set.
When PG feedback control is being set, the motor speed can be monitored through Un-33.
Un-34 -
PID feedback display
When the PID Function is enabled, the PID feedback signal can be monitored through Un-34. If the PID
Function is not enabled Un-34 will be zero.
The display content can be set by P1-01 and P1-02.
P1-01 sets the units of Un-34.
P1-02 is the equivalent value displayed for 100% PID Feedback.
Un-35 -
PID Sleep Monitor
Displays the status of the sleep mode (=1: Sleep mode active; =0: Sleep mode inactive)
Un-36 -
Inverter Output Power
Displays the inverter output power in kilowatts (0.0 - 999.9 kW)
`
Un-37 -
Inverter Energy Usage
Displays the inverter energy usage in kilowatt/hrs (0.0 - 999.9 kWh)
Un-38 -
Inverter Energy Usage
Displays the inverter energy usage in megawatt/hrs (0.0 - 50000 MWh)
Un-39 -
Inverter Energy Cost
Displays the inverter energy cost in dollars (0 - 9999 $)
Un-40 -
Inverter Energy Cost
Displays the inverter energy cost in units of (ten thousand) dollars (0$ - 250 Mil$)
Un-41 -
Flow Meter
Displays the flow meter in gallons/minute (0 - 50000 GPM)
Un-42 -
External PID Feedback display
Displays the PID feedback in (0.0%)
Un-43 -
External PID Set Point display
Displays the PID feedback in (0.0%)
Un-44 -
External PID Output 1 display
Displays the PID output 1 in (0.0%)
Un-45 -
External PID Output 2 display
Displays the PID output 2 in (0.0%)
