GB / IE - 4
Part 3
Use
Turning the burner on and off
Press and turn knob “
A
” (pic.4) from position “
●
” to "
", keeping it
pressed in.
At the same time, press the ignition button “
B
” (pic .4) repeatedly until
the pilot flame has lit up.
After the flame has lit, hold the knob down for approximately 10
seconds (count to 20); so, the thermocouple heats up and the safety
valve can be kept open.
To light the main burner on, turn the knob until it reaches the desired
position.
Note:
if the piezoelectric device cannot be used, you can alternatively
light the flame by using a match or a gas lighter.
Regarding models
FTC4_G7
and
FTC8_G7
, turn the knob from position
1 to 7 to obtain the desired temperature; the appliance reaches its
maximum temperature in position 7 (~300°C).
For models
FTL/R4_G7
and
FTL/R8_G7:
Off
pilot light
Burner MAX
Burner MIN
TURNING THE BURNER OFF:
Turn the knob from the current position to the “
” position.
TURNING THE APPLIANCE OFF:
Turn the knob to the “
●
“ position.
Fat recollection drawer
The appliance has a fat recollection drawer “
V
” (pic.2) located on the
front part of the control panel.
Empty the drawer before using the appliance.
Safety thermostat only on model FTC_G7
In case of overheating (due to improper use or to a faulty component)
the safety thermostat “
E
” (pic .1), placed at the bottom of the appliance,
will operate. It automatically cuts off the gas supply to the burners.
When such device operates, close the gas cock placed upstream of the
appliance and inform the after-sales service.
What to do if the appliance is not going to be used for a long time
Turn off the gas cock installed upstream the appliance.
Clean the appliance with soapy water, rinse, dry carefully and apply a
light layer of white mineral oil.
