Tecnoclima WIMBLEDON 145, Technical Information Assembly, Use And Maintenance Instructions

Page: 16 / 40

INSTALLATION AND SETTING INSTRUCTIONS
- 16 -
CLEREANCE AREA
The machine shall be easily and safely reached without needing special equipment (ladders -
movable platforms -etc.).
Around the machine, minimum distances shall be complied with so that the
control and/or maintenance operations can be performed and that no obstacles block the air flow.
WARNING!
Any Laws or specific regulations requirements (e.g. fire prevention) shall be complied with. Consult the plant
designer.
FUEL CONNECTION
The machine should be connected to the gas (GPL or butane) network by qualified personnel in compliance
with installation instruction.
For appliances fuelled by gas, we recommend installing a leakage detector controlling an electric valve that
stops the gas supply if any leakage is detected.
.
SMOKE EXHAUST PIPE
The height of the smoke exhaust fitting is as mentioned in the figure hereunder:
P
N
O
TYPE
N
(mm)
O
(mm)
P
(mm)
1 150 692 1474
2 180 879 1265
The smoke duct and chimney flue connection must be made in conformity with the Standards and
Legislations in force; they are to be made with rigid metal ducts, resistant to combustion mechanical,
thermal, and chemical stress
The smoke ducts connecting the equipment to the chimney flues must be easy to
dismantle; this is an indispensable condition to allow the checking and internal cleaning
of the heat exchanger.