Tecnoclima WIMBLEDON 145, Technical Information Assembly, Use And Maintenance Instructions

Page: 4 / 40

GENERAL INFORMATION
- 4 -
GENERAL INSTRUCTIONS
This instruction manual is an integral part of the equipment and delivery, and must be preserved with care. In case of equipment resale, the
manual must be delivered to the new owner or user. In case of loss of or damages to this manual, you are kindly requested to contact the
Manufacturer or the Technical Assistance Service of your area.
After removing the packaging, check that its content is in good condition and complete. If it is non-conforming, please contact the Organisation
that sold the appliance.
Air treatment units must be installed by a qualified company, which at the end of the work must provide the owner with a declaration of
conformity stating that the installation complies with the best practice and the applicable national and local regulations, as well as the indications
of this instruction manual.
This equipment has been designed for room heating and must never be used for other purposes that are not compatible with its functioning
characteristics.
Any contractual or extra-contract liability of the Manufacturer in respect of damages caused to people, animal or things by mistakes in
installation, setting or maintenance or by the improper use of the machine is excluded.
A too high temperature is unhealthy and it is a pointless waste of energyDo not leave the rooms closed for a long time. Regularly
open windows to facilitate a proper air renewal.
Smells and fumes may be produced during the first start-up, due to the evaporation of the liquid that protects the heat exchanger during
storage; this event is normal and disappears after a short period of operation. Air the room properly.
If you plan not to use the machine for a long time, carry out at least the following operations:
• turn the appliance’s master switch and the plant’s master switch to “OFF”
•
close the central cock that feeds the fuel
If the air treatment unit is shut down for long periods of time, it is recommended to inform the Technical Assistance Service or a professional
staff qualified to restart it.
The appliance must be equipped exclusively with original accessories. The Manufacturer shall not be held liable for any damage caused by
improper use of the equipment or by the use of non-original materials or accessories.
References to Laws, Regulations, Directives and Technical Rules mentioned in this manual are made only for information
purposes and as they are in force when the manual is printed. If new regulations or amendments to current laws go into effect, this
shall not oblige the Manufacturer with regards to third parties.
Servicing or maintenance operations shall be carried out by the After-sales Service or by qualified personnel, as provided for by this handbook.
Never modify nor tamper with this equipment, since this might cause hazardous situations, and the Manufacturer shall not be held liable for any
consequent damage.
The systems that shall be prepared (gas piping, power supply etc.) shall be properly secured and shall never become obstacles, involving the risk
of stumbling.
The Manufacturer is responsible for the product compliance with Laws, Directives or Construction Standards in force when the product
is marketed. Knowledge and compliance with the laws and regulations concerning plant design, installation, operation and
maintenance of the plant are the exclusive responsibility of the Designer, Installer and User, respectively
The Producer shall not be held responsible for failure to comply with the instructions of this manual, for the consequences of any
operations carried out and not specifically provided for or for translations open to misinterpretation
.
The equipment functions with airflow and variable thermal power and works with combustion fuels condensate.
BASIC SAFETY INSTRUCTIONS