Menu Data administration
45
MENU Data administration
In this menu the commands concerning the administration and protection of the function data as well
as the update of the operating system are listed. The menu items for data transfer are valid only for
Bootloader BL-NET. Data transfer via C.M.I. is described in the online manual of the C.M.I.
current func. data:
TA FACTORY SETTINGS
Name of the current function data (TAPPS)
Status: original
if function data have already been changed: modified
Save settings as
factory settings
Load factory setting
Create backup copy
Load backup copy
(Only appears if a backup copy exists!)
Delete functions
Execute total reset
DATA <=> BOOTLOADER:
Upload data:
CTRLLR => BOOTLD.
Download data:
BOOTLD. => VTRLLR
Data administration is valid only for Bootloader BL-
NET.
OPER.SYSTEM<=BOOTLD.:
Download oper.system :
BOOTLD. => CTRLLR
Internal Data administration
Current function data:
TA FACTORY SETTING
– The function data with this specification have been transferred to the
control unit.
The TA factory setting can be loaded by simultaneously pressing the two input
keys and scroll wheel when starting up the controller.
Status: original
– Since transmission, nothing has been changed in the function data.
Save settings as factory setting
– The function data of two heating circuits including solar and
charging pump system are put down in the unit as factory setting. If proprietary programming has
been tested, it uses this command to replace the original setting as a factory setting.
Load factory settings
- Call via the following commands in a security query YES / NO.
WARNING:
By this, the own function data will be deleted and replaced by the factory setting (ex works or an own
one previously created). Nevertheless, a previously created backup copy (see following commands) is
maintained.
