Menu Functions
29
The following example shows how to set a new function.
Indication example
from the menu Functions:
5: CHARGING PUMP
CHRG PUMP1 PAR?
The function module already has been assigned to
function 5 “Charging pump”.
6: NEW FUNCTION
----- PAR?
◄
A new module can be entered.
Employing the following procedure a new function module can be added: Induce the pointer to
PAR?
and press the scroll-wheel. The following text appears in the display:
TYPE: HTG CIRC.CTRL
DES.:
-----
Scope of TIME PROG:
Number of prog.: 1
At present the computer suggests the module
HTG CIRC.CTRL
as a new function with all its options.
Assuming that the module
SOLAR CONTROL
is to be added, press the wheel once again under
“TYPE” in order to switch to the selection of a function module. Now, the desired module can be
selected by means of the scroll-wheel. By pressing the wheel once again the new module
SOLAR
CONTROL
is called.
Indication example:
TYPE: SOLAR CONTROL
DES.:
-----
ADD? no
In the line DES.: a text for the module can be selected (by the usual operation – press / select text /
press). Assuming that a solar circuit already exists as function number 1 with the designation ”SOLAR
1” “SOLAR 2” will be selected.
In addition, the question "ADD?
no
” is to be answered with
yes
. The computer has now taken over the
module
SOLAR CONTROL
in the list under the number 6 and immediately shows the menu of this
function which is now the module solar control SOLAR 2.
Hereby the
indication example
is as follows:
DES.: SOLAR2
FUNCTION STATUS:
INPUT VARIABLE:
OUTPUT VARIABLE:
COLLECTOR TEMP.:
T.coll.ACT: -----
T.coll.MAX: 130 °C
.....
and so on
