"CAN-Netzwerk" (CAN network)
The "CAN - Netzwerk" ("CAN network") menu shows all active devices (nodes) connected to
the bootloader via the CAN bus. Selecting a "Knoten" (node) and then executing the
"Menüseite laden" ("load menu page") command allows direct access to the menu pages of
the node.
According to the illustration, the bootloader is
node 62 of the "CAN-Netzwerk" (CAN network).
Nodes 1, 2, 32 and 50 are also active in the
network.
"Knoten" (node) 1 is selected, in this case an
UVR1611.
Select:
Select the desired "aktive Knoten"
(active node) and click the
button.
The link button
"Menüseite
laden" ("load
menu page")
is used to access the nodes.
The menu page of the device is then displayed.
UVR1611 menu page
The controller pages displayed in the browser are directly loaded from the controller and
translated into HTML by the bootloader. For larger pages, this can result in loading times of
several seconds!
As with the controller, the top line shows the
status of the outputs.
Green:
Output on
Red:
Output off
H
means "Handbetrieb" (manual operation).
Further navigation is done by clicking the link
symbols.
These buttons allow direct selection of the
most important submenus.
37
