11. After the bootloader has been prepared, the PC software must also be configured with
the correct IP address and corresponding port. Point 9 describes configuration of the
device only. Since several bootloaders can be connected in a LAN network, this infor-
mation must be specified again in the software (
Winsol
or
Memory Manager
)
in order
to address the correct BL-NET.
12. The ethernet connection can then be checked via "Test IP". Access to the BL-NET via
a browser (Opera, Internet Explorer, etc.) using the IP address is now possible, and
thus also to the CAN network (UVR1611).
32
