Clicking "Take over" transfers the determined parameters into the setup.
With BL-NET it is possible to communicate via ethernet
(computer network). To do this, the "IP" connection must
be selected. The IP address or domain name of the BL-
NET and its TA port must also be set. The ethernet
interface is only activated when power for the BL-NET is
provided over the CAN bus!
"Test IP" has the same function as "Test COM", but for the ethernet connec-
tion. "Test IP" only returns a valid result when the ethernet interface of the
BL-NET has already been parameterised and the IP address and port of the
bootloader have been correctly specified in the
Winsol
setup.
See also the section "Connecting the BL-NET to a LAN network"
Clicking "Take over" transfers the determined parameters into the setup.
When first commissioning, or if problems occur with the ethernet interface, please follow the
instructions in the section
"Connecting the BL-NET to a LAN Network"
.
15