7
Mon. - Fri. 8 am - 7 pm
+49 (0) 180/5 005907*
*(0.14 Euro/min from German landlines, other tariffs apply for calls from abroad or from
mobile networks)
If the TV needs to be sent to us for any reason, please only use the following address:
TechniSat Teledigital GmbH
Service Center
Nordstr. 4a
D-39418 Stassfurt - Germany
2.4 Wall mounting
You can use a wall bracket to attach your TV to a suitable wall. You can obtain a suitable
wall bracket, e.g. one of the following, from a specialist dealer.
HD-Mount Flex
(2020/2750)
suitable for the MultyVision ISIO 32
TechniMount
(2020/2760)
suitable for the MultyVision ISIO 32 / 40 / 46
You must remove the stand for wall mounting.
2.4.1 Removing the stand
>
Lay the TV down with the screen side on a level surface.
Ensure that no pressure is placed on the LCD panel and that it is not damaged.
>
First remove the two marked plastic caps by carefully sliding a small slot screwdriver
under the caps into the recess and then lifting out the caps.
>
Loosen and remove the two marked stand screws.
>
Loosen and remove the two marked central screws.
>
Now carefully remove the stand from the underside of the TV and instead place the
stand cover provided on the exposed underside of the TV as shown.
