If remote access should also be available when the MultyVision ISIO is on standby, the
fast start function must be enabled.
5.4.1 Enabling/Disabling remote access
>
In the
Remote Access
line, switch the function
on
or
off
.
The following settings (sections 5.4.2 - 5.4.6) can only be selected if remote access is enabled.
5.4.2 Password
>
Use the
virtual keyboard
to enter the password you want.
A password must always be entered if the remote access function is enabled.
5.4.3 Port number
By entering the port number you can specify which port number should be used for remote
access to the TV in the network.
>
Enter the port number corresponding to the router.
When entering a different port number, this must be greater than 1024.
To make unauthorised access harder, you should change the port number.
5.4.4 Dynamic DNS service
>
In the
Dynamic DNS service
line, select one of the supported DNS services.
5.4.5 Host name
>
Use the
virtual keyboard
to enter the host name you defined when setting up the
DNS service user account.
5.4.6 User name
>
Use the
virtual keyboard
to enter the user name for the DNS service user account.
5.5 UPnP server
This function enables you to use UPnP-compatible devices that are located on the same
network as your MultyVision ISIO to access films, pictures and music located on a storage
medium configured as per section 5.5.4 via the MultyVision ISIO's UPnP server.
If the UPnP server should also be available when the MultyVision ISIO is on standby,
the fast start function must be enabled in
Main Menu > Settings > Basic
Settings
.
>
Call up
Main Menu > Settings > Special Functions > UPnP Server
.
34
