23
Number of antenna signals (DVB-S)
Select the number of attached DVB-S antenna feed lines.
If the DVB-S source has been disabled, this page of the installation wizard does not
appear; you are taken directly to the
Antenna settings (DVB-T)
page instead.
>
Use the
right/left arrow keys
to select the attached antenna signals and confirm
by pressing the
OK
button.
Antenna configuration (DVB-S)
In this step of the installation you can adjust your TV setup to the configuration of your
satellite antenna.
If the source DVB-S has been disabled as described in the
Selection of reception
signals
step, you will be taken straight to the
Antenna configuration (DVB-T)
page of the installation wizard instead of this page.
>
Press the
OK
button to accept the default antenna setting and continue with the
Antenna configuration (DVB-T)
section.
>
If the configuration of your reception equipment does not match the default setting,
you can open the antenna configuration function by pressing the
Options
button and
adjust the setting on your reception equipment.
