5-41
EO18-33002A
5. DIAG. TEST OPERATION
(Revision Date: Dec. 20, 2000)
5.3 PARAMETER SETTING MODE
5.3.9
Supply Holder’s Paper End Sensor Selection
Using the following procedure, use or non use of the supply holder’s paper end sensor is used can
be selected.
NOTES:
1.
Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds
enables a fast forward.
2.
A changed setting is stored in memory by pressing the [PAUSE] key.
Power off
Press the [FEED] key.
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1
D I A G .
V 1 . O A
>
< 2
P A R A M E T E R
S E T
>
Press the [PAUSE] key.
Press the [FEED] eight times.
P O
I T I O N
S
Press the [PAUSE] key .
Paper end sensor selection display
W I
H P A P E R E N D
T
S U
P L Y H O L D E R
P
Paper end sensor selection display
Press the [FEED] key or [RESTART] key to
supply holder’s paper end sensor selection.
Press the [FEED] key or [RESTART] key
at the same time
WITHE PAPER END: Use of paper end sensor
WITHOUT PAPER END: Non use of paper end sensor
Press the [PAUSE] key .
