TEC CB-416 Series, Maintenance Manual

Page: 36 / 88

5-8
EO18-33002A 5. DIAG. TEST OPERATION
Fig. 5-2
5.2 SELF TEST MODE
■
Sample Print
[Print Condition]
• Preset count
: 1
• Print speed : 6”/sec.
• Sensor : No sensor
• Printing method : Thermal transfer
• Supply length
: 126 mm
• Issuing mode : Batch printing
1) Maintenance Counter
#
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
Item
Total media distance
covered
Media distance
covered
Cut count
RS-232C hardware
error count
Momentary power
failure count
Print distance
Head up and down
count
Ribbon motor driving
time
Count Condition
Counted when the feed motor drives to feed,
print and issue the media. (Counted also
during ribbon save operation and back feed.)
[See NOTE 2.]
Counts every cut. [See NOTE 3.]
Counted when a parity, overrun or framing
error occurs. [See NOTE 5.]
Counts the number of times the power restores
while the CPU is busy after reset.
Counted while printing. (Feeding and issuing
media, and ribbon saving operation are not
counted.) [See NOTE 2.]
Counts every up and down of the print head
using the solenoid for ribbon save operation.
(Up + Down = 2 count) [See NOTE 3.]
Counts when the ribbon motor drives to feed,
print and issue the media. (The driving time is
not count during ribbon saving operation, but is
during back feed.) [See NOTE 4.]
Range
0.0 to 3200.0 km
0.0 to 200.0 km
0.0 to 1000000
times
0 to 255 times
0 to 15 times
0.0 to 200.0 km
0 to 2000000 times
0 to 2000 hours
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
(14)
(15)
(16)
(18)
(19)
TL FEED : 0.0Km
FEED : 0.0Km
CUT : 0
232C ERR : 0
PW FALL : 0
HEAD 1 HEAD2
BLACK MAGENTA CYAN YELLOW
PRINT : 0.0 Km 0.0Km 0.0Km 0.0Km
HEAD U/D : 192 64 96 64
RIBBON : 0h 0h 0h 0h
[PC] [KEY]
FEED : +0.0mm -2.0mm
CUT : +0.0mm +0.0mm
BACK : +0.0mm +0.0mm
STOP : +0.0MM +0.0MM
X ADJ. : --- +0.0mm
[PC] HEAD 1 HEAD2
BLACK MAGENTA CYAN YELLOW
X DIRECTION : +0.00mm +0.00mm +0.00mm +0.00mm
Y DIRECTION : +0.00mm +0.00mm +0.00mm +0.00mm
TONE : +0step +0step +0step +0step
RIBBON VOLTAGE
REWIND
: +0step +0step +0step +0step
SUPPLY : +0step +0step +0step +0step
[KEY] HEAD 1 HEAD2
BLACK MAGENTA CYAN YELLOW
X DIRECTION : +0.00mm +0.00mm +0.00mm +0.00mm
Y DIRECTION : +0.00mm -0.08mm -0.42mm -0.50mm
TONE : +0step +0step +0step +0step
FONT : [PC-850] [0]
CODE : [AUTO]
: The CB-426-T3 does not print these data.
CB-426
CB-416
CB-426
CB-416
CB-426
CB-416