5-36
EO18-33002A
5. DIAG. TEST OPERATION
(Revision Date: Dec. 20, 2000)
5.3 PARAMETER SETTING MODE
5.3.5.4 Pulse Motor Speed Selection
If a color misalignment occurs when using the ribbon saving function frequently, increase the pulse
motor speed by 4% to prevent the color misalignment.
Power off
Press the [FEED] key.
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1
D I A G .
V 1 . O A
>
< 2
P A R A M E T E R
S E T
>
Press the [PAUSE] key.
Press the [FEED] key and
[RESTART] key at the
same time.
Press the [FEED] key four times.
P O
I T I O N
S
Press [PAUSE] key four time.
Printer parameter setting display
P U
S E
M O T O R
A U T O
L
P R
N T E R
P A R A
I
Pulse motor speed selection
AUTO : Automatically set
104 : Increased by 4%
Press the [FEED] or [RESTART] key to
select the motor type.
Press the [PAUSE] key.
Continued on section 5.3.5.5
Euro Font Code Selection.
NOTES:
1.
Usually select “AUTO” for the pulse motor speed. A color misalignment may
occur, however, according to the print patterns even when “AUTO” is selected.
In this case, fine adjust the platen speed in Section 5.3.6 Platen Speed Fine
Adjustment Mode. If the paper becomes slack between the platens with “AUTO”
pulse motor speed, increase the platen speed by pressing the [FEED] key.
2.
Select “104” for the pulse motor speed if a misalignment occurs even after the
platen speed fine adjustment, or the printer prints such print patterns that the all
print heads frequently up and down in ribbon saving mode.
3.
Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds
enables a fast forward.
4.
A changed threshold fine adjustment value is stored in memory by pressing the
[PAUSE] key.
5.
The default setting is Auto.
