6-65
6. DIAG. TEST OPERATION
EO18-33006
6.5.4 Paper End Setting for Black Mark Sensor
Paper end setting should be performed after replacing the CPU PC board or changing the tag paper
to other maker’s one, or when a paper feed error occurs.
6.5 SENSOR SETTING MODE
NOTE:
Pressing the [PAUSE] key validates the sensor adjustment. The value of the sensor is
displayed up to 5.0 V.
Power off
Turn on the power while holding down
the [FEED] key and [PAUSE] key.
Press the [FEED] key three times.
Remove any paper
from the sensor
detecting area.
The former value is displayed.
Holding the [FEED] key or [RESTART]
key down until an asterisk ( * ) is
displayed. (More than 3 seconds.)
Press the [PAUSE] key for
Paper End Setting for Feed Gap Sensor
Indicates the completion of
adjustment .
Ex)
Press the [PAUSE] key four times.
Press the [FEED] key
and [RESTART] key
at the same time.
(See NOTE.)
< 1
D I A G N O S T I C V
>
1 . 0 A
< 4
S E N S O R A D J U S T
>
M E N T
[ P
L E V E L . R ] 4
E
. 3 V
[ P
L E V E L . R ] 4
E
. 3 V *
