6-37
6. DIAG. TEST OPERATION
EO18-33006
6.3.16 Ribbon Saving Module Selection
6.3 PARAMETER SETTING MODE
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [FEED] key.
Press the [PAUSE] key 17 times.
Select ribbon saving module
with the [FEED] key or
[RESTART] key. (See NOTE 1.)
Press the [FEED] key
and [RESTART] key
at the same time.
Press the [PAUSE] key.
Continued on Section 6.3.17
Control Code Selection
.
OFF:
The ribbon saving module is not used.
ON:
The ribbon saving module is used.
< 1
D I A G N O S T I C V
>
1 . 0 A
R I
B O N S A V E
B
O N
< 2
P A R A M E T E R S E T
>
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables a fast
forward.
2. A changed data length is stored in memory by pressing the [PAUSE] key.
