6-11
6. DIAG. TEST OPERATION
EO18-33006
■
Print status content description of each sensor/switch
6.2 SELF TEST MODE
(8) Sensor 1 Check
SENSOR1 0 0 0 0 0 0 0 0 , 1 0 1 1 0 0 1 1
Fixed to 1.
Fixed to 1.
Cutter home potion switch status
0: Home position
1: Other position
Rewind full sensor status
0: Normal
1: Excess
Slit sensor #1 (take-up) status
0: The detecting point is positioned
outside the slit.
1: The detecting point is positioned
inside the slit.
Slit sensor #2 (feed) status
0: The detecting point is positioned
outside the slit.
1: The detecting point is positioned
inside the slit.
Fixed to 0.
Strip sensor status
0: Without label
1: With label
Fixed to 0.
Fixed to 0.
Print status content description
Indicates whether the cutter is at the home position or not.
Indicates whether the media is wound to peak capacity on the built-
in take-up spool or not.
Controls ribbon motor rotation by detecting the slit on the ribbon
take-up motor and the ribbon feed motor. Indicates the position of
the slit sensor.
Indicates the existence of label in strip mode. When no label is
detected (0), the subsequent label is issued, when a label is
detected (1), the subsequent label will not be issued until the
current label is removed.
Sensor/Switch
Cutter home position switch
Rewind full sensor
Slit sensor #1 (take-up)
Slit sensor #2 (feed)
Strip sensor
