TEC B-450 SERIES, User Manual

Page: 147 / 222

5-2
EO18-33003A 5. ON LINE OPERATION
5.1 RESET OPERATION
■
Display Indication Table
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
LCD Message
ON LINE
HEAD OPEN
PAUSE ****
COMMS ERROR
PAPER JAM ****
CUTTER ERR ****
NO PAPER ****
HEAD OPEN ****
EXCESS HEAD TEMP
RIBBON ERR ****
FLASH WRITE ERR.
FORMAT ERROR
MEMORY
OVERFLOW
SYNTAX ERROR
STACK FULL ****
STACKER ERR ****
THERM.UNCONNECT
HEAD ERROR
Printer Status
On-line mode
The head is opened in on-line mode.
In a pause state
A parity, overrun or framing error
occurred during RS-232C communica-
tion.
A paper jam occurred during paper
feed.
An error occurred at the cutter module.
The label has run out.
Paper feed or issue is attempted with
the head block opened.
The print head is too hot.
Ribbon error (Ribbon error, ribbon
break)
An error has occurred when writing
data into the flash memory.
A deletion error occurred while format-
ting the flash memory.
No more data can be saved in the flash
memory.
Undefined command is retrieved.
The stacker is full of paper.
Printing was attempted while the
stacker is off.
Environment temperature thermistor is
disconnected.
The print head has broken elements.
Restoration by pressing the
[RESTART] Key.
Possible / Impossible
-
-
Possible
Possible
Possible
Possible
Possible
Possible
When the print head tem-
perature becomes under
60
°
C, printing restarts
automatically.
Possible
Impossible
Impossible
Possible
Possible
Impossible
Impossible
Impossible
Impossible
**** : Remaining number of labels to be printed.