TEC B-450 SERIES, User Manual

Page: 87 / 222

3-1
3. OPTIONAL KIT EO10-33003A
Use
This cutter module uses a rotary cutter. It cuts backing
paper of labels and tag paper automatically in "stop and
cut" mode.
This strip module strips the label from the backing paper
with the take-up block and strip block. When the
rewinder guide plate is attached, the tag paper and label
with backing paper are wound.
This module is an external intelligent keyboard unit.
Installing this board in the printer allows a connection with
an external device with the exclusive interface, such as
the Keyboard module.
Installing this board in the printer allows a connection with
a PC by the Centronics parallel interface.
This board enables the printer to be used in a LAN
network by using the command language.
3. OPTIONAL KIT
3.1 CUTTER MODULE: B-7204-QM
Fig. 3-1
Print Head
Cutter
Platen
Option Name
Cutter module
Strip module
Programmable
Keyboard
module
Expansion I/O
interface board
(TS model only)
Centronics
interface board
(TS-QQ model
only)
LAN I/F Board
(TS model only)
Type
B-7204-QM
B-7904-H-QM
KB-80-QM
B-7704-IO-QM
B-7704-C-QM
B-7704-LAN-
QM
3.1 CUTTER MODULE: B-7204-QM
This compact cutter module uses a built-in rotary cutter. The specification is provided below:
1
Cutting method .............. Rotary cut
2 Cut mode ...................... Stop cut
3 Cut width ....................... 25.4 ~ 114.0 mm
4 Cut length ...................... Tag paper:25.4 ~ 999.0 mm, Label:37.0 ~ 999.0 mm
5 Thickness ...................... 100.0 ~ 170.0
µ
m
6 Home position switch .... Micro switch
NOTE: To purchase the OPTIONAL KIT, please contact your authorized TOSHIBA TEC represen-
tative or TOSHIBA TEC Head Quarter.
33 mm