17
EN -
NOTE:
• Always check the sealing ring
20
is correctly installed before each use. Remove
and clean the sealing ring
20
after each use.
• Sealing rings
20
stretch over time and should be replaced every 12-18 months or
sooner if they become loose or deformed.
Condensation collector
• Attach the condensation collector
6
at the rear of the housing by sliding it into the
matching slot.
• Slide it off to remove and empty the condensation.
Location
Place the assembled pressure cooker on a level, dry, non-slip, heatproof and waterproof
surface where it cannot easily fall or slip off.
7.3 Initial test run
Perform an initial test run using water by following these instructions:
1/4
2 T
bsp
1/3
1/2
2/3 3/4
1 C
up
1/4
2 Tbsp
1/3
1/2
2/3
3/4
1 Cup
1/4
2 Tbsp
1/3
1/2
2/3
3/4
1 Cup
1. Fill the inner pot
4
with 3 cups of
water.
2. Close and lock the lid: put the lid
21
on the cooker making sure you line up
the unlock symbol on the base
10
with the arrow
on the lid.