USER GUIDE
/// ENTRELEC TERMINAL BLOCKS - HTP600 THERMAL TRANSFER PRINTER ///
412-121040 REV 1
65
NOTICE
The printer has an automatic cleaning function.
In case the automatic cleaning function should not clean enough, remove the roller and clean
it manually as illustrated above.
Don’t scratch the cleaning roller. After the cleaning, let the roller dry completely before
inserting it back into the printer.
The cleaning roller is a consumable part so, once is worn up, replace it with a new one.
Replace the cleaning roller at least once a year.
OTHER PARTS TO CLEAN
Before using the printer check it and clean it as described below.
Print head
Clean the print head using a blower, soft cloth, cotton swab or cleaning paper. Remove
accumulated debris. Be careful not to scratch the print head.
Roller
Use a soft cloth to clean the roller wiping dirt and oil off.
CAUTION
Don’t scratch the print head.
Don’t clean the print head using cloths that have metallic particles adhering to them.
If the print head is scratched this can’t print anymore in the scratch zone.
When cleaning the print head be careful.
SPARE PARTS
Cleaning roller
The printer is equipped with a cleaning cassette that helps to maintain the cleaning roller
effectiveness.
Cleaning roller:
Cleaning cassette:
