USER GUIDE
/// ENTRELEC TERMINAL BLOCKS - HTP600 THERMAL TRANSFER PRINTER ///
412-121040 REV 1
63
NOTIFICATION MESSAGES
Cover Open
The cassette cover is open.
Close the cassette cover and press Online.
Push Online
The cassette cover has been open when the printer was ready to print. Close the cassette
cover and press Online.
No Plate! O NO SHEET!
No item has been loaded into the printer. Insert an item into the printer.
Insert plate! O INSERT SHEET!
No item has been detected at the start of printing. Insert an item into the printer.
Insert Feeder
No support plate for the items has been inserted. Insert the correct support plate in the printer.
Remove plate and set plate again
Printer could not position properly the item to print. Pull out the item and try again to insert it.
No Ribbon!
There is no more ribbon in the ribbon cassette or the ribbon cassette has not been loaded
correctly.
Check the ribbon in the ribbon cassette and load the ribbon cassette again.
No Cleaning Tape Change cassette
The end of the cleaning tape has been reached. Replace the cleaning cassette.
Head too hot
The printer internal temperature is too high.
Wait for the printer to cool down. Cooling is Automatically carried out. Once the cooling
process is complete, the printer can start printing again.
Media not ready
The sensor does not recognize the item’s edge.
Verify that the item’s edge isn’t indented or isn’t regular. Contact TE Technical Assistance
.
FAILURE MESSAGES
Service Call CODE: 01
The head print does not communicate correctly with the control unit. Verify that the connector
is well connected to the head.
Service Call CODE: 02
The switch of the cassette cover is not closed.
Verify that the cassette cover is closed and perfectly adherent to the body.
Service Call CODE: 03
One of the printer parts might be damaged.
Ask TE Technical Assistance
.
Service Call CODE: 06
The fan in the back side of the Printer does not work well.
Verify that the fan is well connected and that there is enough space behind the printer.
Service Call CODE: 07
The printer doesn’t communicate correctly with the group head / ribbon.
Verify that the ribbon cassette is well loaded, that is tighten beneath the head, that is adherent
to the body printer.
