USER GUIDE
/// ENTRELEC TERMINAL BLOCKS - HTP600 THERMAL TRANSFER PRINTER ///
412-121040 REV 1
59
MAINTENANCE
USEFUL FUNCTIONS
To access at the printer’s function Press Online on the control panel, so that the online led turns
off and the printer goes offline.
CHANGE LANGUAGE
1) Press [Menu/
]
2) Press [Menu/
] and [
] to display “Language”
3) Press ENTER
4) Press [Menu/
] to change selection (English, French, Italian, German, Spanish)
5) Press ENTER to confirm.
AUTO Turn Off
Function to define the shutdown of the printer after a period of non-use.
1) Press [Menu/
]
2) Press [Menu/
] and [
] to display “Auto Off”
3) Press ENTER
4) Press [Menu/
] and [
] to change selection (off to delete the option, later 5min, later 10min,
later 30min)
5) Press ENTER to confirm
BACKLIGHT
Function for the definition of the brightness of the Printer LCD Panel.
1) Press [Menu/
]
2) Press [Menu/
] and [
] to display “Backlight”
3) Press ENTER
4) Press [Menu/
] and [
] to change selection (1 darker, 5 lighter)
5) Press ENTER to confirm
AUTO CLEANING - Changing the cleaning roller timer for cleaning
AUTO CLEANING Function
This function is optional and must be set according to the environmental conditions. The User
sets the timing for the automatic cleaning of the cleaning roller.
The cleaning interval is set in terms of printed length (NO, 500, 1000, 2000, 5000 mm).
If the cleaning roller quickly becomes dirty, the interval should be reduced, On the contrary if the
cleaning roller stays clean, the cleaning interval can be lengthened.
6) Press [Menu/
]
7) Press [Menu/
] and [
] to display Auto Cleaning
8) Press Enter and [Menu/
] and [
] to select NO or 500, 1000, 2000, 5000 mm after
9) Press Enter to confirm
