USER GUIDE
/// ENTRELEC TERMINAL BLOCKS - HTP600 THERMAL TRANSFER PRINTER ///
412-121040 REV 1
54
The PL2M Support Plate for the Terminal blocks markers should be inserted in the HTP600
printer in the way that the encoder, underneath the support plate, should be on the below left
lateral part.
With the Support Plate positioned on the printer, fix the guides using the locking screw. Once
the guides are aligned, fix them in the desired position utilizing the screw.
NOTICE
Do not tighten the locking screw too much. Do not loosen the locking screw too much, only
enough to adjust and fix the guides in the proper position.
Insert the support plate as in the picture below, until you hear a beep.
