USER GUIDE
/// ENTRELEC TERMINAL BLOCKS - HTP600 THERMAL TRANSFER PRINTER ///
412-121040 REV 1
22
LOADING / REMOVING THE CLEANING CASSETTE
Loading of the Cleaning Cassette
HTP600
has a special cleaning cassette purposely designed to clean up the cleaning roller.
To load the cleaning cassette, perform the following steps:
1) Lift the cassette cover.
2) Take out the ribbon cassette.
NOTICE
Never use the printer without the cleaning cassette. Using the printer when the cleaning roller
is dirty can damage the print head.
Before loading the cleaning cassette, take out the ribbon cassette. Trying to load the
cleaning cassette while the ribbon cassette is still in place, could cause the cleaning cassette
to be loaded incorrectly.
3) Lower the setting lever. The cleaning roller will raise
4) Open the new cleaning cassette, pull the tape until the cleaning tape comes out.
Peel off the tape.
Auxiliary Cleaning
Roller will rise
Lower the setting lever
To release Position
