USER GUIDE
/// ENTRELEC TERMINAL BLOCKS - HTP600 THERMAL TRANSFER PRINTER ///
412-121040 REV 1
16
Precaution while moving the Printer
Before moving the printer or while using and maintaining the HTP600, always observe the precaution
below to prevent risks of fire, electric shock or burns. (Always observe local safety rules)
The printer weight is 9.5 kg.
Lift the printer with two hands.
Keep the printer near the body while you are moving it.
Before moving the printer, locate a suitable flat surface.
Make sure that all the printer parts can be rotated and / or moved (eg. cover of the
head protection) are fixed and / or locked properly.
Ensure all connections to the printer are disconnected
.
Check the space available along each side of the printer, complies with the
dimensions, shown on page 14.
Check the power supply compatibility. into the destination place
Hold the printer firmly.
Do not carry the printer using the cover.
Recommended Environmental Conditions
Utilize HTP600
in the following environmental conditions:
Temperature °C
Humidity % RH
Operating
environment
15 to 32.5
15 to 80
Storage environment
5 to 35
35 to 85
When gentle opening and closing the cassette cover or tray, be careful not to catch your fingers.
WARNING
Do not touch the cassette cover and the rollers during the printing phase
