System 3
2-21
RS4 Data Streamer
A resyncing status is displayed while reformatting a mirrored array. This status is
unique to the mirrored array type and is verification for the mirrored partitions of the
array. One partition is read while another partition is simultaneously written to. This
ensures that mirrored partitions are in sync to provide data loss prevention. Prior to
completion of the resyncing process, data loss prevention is disabled.
Note:
If the resyncing process is interrupted by a loss of power or shutdown of the
system, it will resume to where it left off prior to the interruption.
To reformat the RS4 storage array:
1. Press the
Config
tab on the RS4 interface.
2. Press the
Reformat Array
button.
3. Press the desired array type or press Cancel to exit.
USB
Ports
Two USB 2.0 ports are provided for small/slower data transfers (typically less than
several GB of data) or for access to the storage array when no network or PC is
available. The ports support connections at any time while the device is powered.
When supported USB media is detected, the interface will display only the total
space existing on the media as a reference. It does NOT display available space on
the media.
Note:
TDT recommends that you do not attempt to copy or move files using the USB ports
while a recording session is active.
Device
Status
LEDs
The device status LEDs report streaming or network activity. The following tables
display the status LED indicators.
Video
Not currently implemented.
Summary of Contents for RZ2
