TDT RZ2, Manual, Page: 640 / 736

17-22 System 3
BBOX Button Box
To follow along with this example:
• Open the LED1 RPvdsEx file in the ButtonBox example folder (TDT|RPvd-
sEX|Examples|ButtonBox).
To designating and turn on/off an LED and button:
1. To set the color or position of the LED (0 = Top, 1 = Left, 2 = Right, 3
= Bottom), click the green up and down arrows on the DataTable labeled
Color.
2. To determine which column the LED is in (0 = Far Left... 7 = Far Right),
click the green up and down arrows on the DataTable marked Column .
3. To turn on the LED, press the zBusA trigger button in RPvdsEx. Make sure
to click the pulse button for the zTrig. To turn off the LED press the
zBusB trigger.
You can select (one at a time) several lights to turn on and off.
For example, to light the top LED in the first column and the bottom LED in the
last column perform the following steps:
1. Set the Color DataTable to 0 and the Column DataTable to 0.
2. Turn on the LED by clicking the zBusA trigger button in RPvdsEx. This will
turn on the top LED in the first column.
3. Set the Color DataTable to 3 and the Column DataTable to 7.
4. Click the zBusB trigger button in RPvdsEx. Both LED's should now be on.
5. To turn off the latter LED, click the zBusB trigger button.
6. To turn off all LEDs, click the Soft2 button in RPvdsEx.
7. To turn on all LED's in succession, set the zBusA trigger line high
and then cycle through the DataTable values.
8. To reverse the operation set the zBusA trigger low , set the zBusB
trigger high , then cycle through the DataTable values.