User Setup
DIGIgarde PLUS User Guide
Copyright
©
2012 TDSi
Last Change
Page 26
13 May, 2016
6.
The scanning process takes a few seconds. When this is complete, the
DIGIgarde PLUS beeps and prompts the user to remove their finger. Repeat
this procedure for two further scans.
7.
If the enrolment is successful, DIGIgarde PLUS prompts you to save the
scanned fingerprint. Press the
OK
button to save the fingerprint template
and create the user account or press
ESC
to discard the scans and cancel
the enrolment.
NOTE.
If you forget to press the
OK
button the template will not be saved.
If you want to enrol another user, press the
OK
button.
If you want to enrol a backup fingerprint for the same user, press
ESC
.
If you want to return to the main menu, press
ESC
twice.
Table 7
Possible fingerprint enrolment errors
Screen message
Voice
prompt
Description
Input again
“Please
try again”
Error during scanning. For example, a
different finger was used for one of the
scans.
FP Enrolled Alrd
“Duplicate
finger”
The fingerprint has already been
enrolled to an existing user ID.
New Enrol
000000001-0
ESC
OK(Save)
New Enrol
000000001-0
Remove finger
ESC/Exit
New Enrol
000000001-0
Remove finger
ESC/Exit
New Enrol
000000001-0
Third Press
ESC/Exit
New Enrol
000000001-0
Second Press
ESC/Exit
Summary of Contents for DIGIgarde PLUS
Page 70: ......