![background image](http://html1.mh-extra.com/html/tdsi/digigarde-plus/digigarde-plus_user-manual_3895812049.webp)
Standalone Mode
DIGIgarde PLUS User Guide
Last Change
Copyright
©
2012 TDSi
13 May, 2016
Page 43
5.3
5.3
5.3
5.3
The Access Control
The Access Control
The Access Control
The Access Control m
m
m
menu
enu
enu
enu
To alter any of the DIGIgarde PLUS user access settings:
1.
Press the
Menu
button and, if necessary, verify your identity.
2.
Press the
▼
key to select
Options
.
3.
Press the
OK
button. The
Options
menu is displayed.
4.
Use the
▼
key to scroll down to
Access Options
. Press the
OK
button. The
Access Options menu is displayed (see Table 13).
Table 13
Access Options menu
Access Options
Use
Default
Define TP
Define weekly time patterns; up to 50
1
User Acc Opts
User Account Options: assign individual users to
groups, apply time patterns and verification
methods.
Grp TP Define
Define Group time period: Is used to set group
unlocking time. 1-5, time period 1-50.
1
Access Comb
(Unlocking combination): define up to 10
different 5-digit unlocking combination codes
(see page 47); each combination code is
composed of the number and order that group
users must be validated for access.
Lock
Time that the lock drive is powered (0-254
seconds). Set to zero to lock the door to all
users.
10
Dsen.Delay
Delay time (in seconds) after the lock is powered
before the DIGIgarde PLUS checks on the state
of the door sensor. If the door state at this time
is anything other than that set in
Dsen Mode
10
Access Options
↓
►
Define TP
User Acc Opts
GRP TP Define
Options
↨
LED Mode
Data Out Type
►
Access Options
Options
↓
►
System Opt
Power Mng
Comm Opt
Menu
↓
User Manage
►
Options
Sys Info
Summary of Contents for DIGIgarde PLUS
Page 70: ......