TDI-Dynaload Division
WCL488 Series Water Cooled Electronic Loads
Operation & Programming Manual
402828, Rev. B1
Page 83
T2 Pulsing Peak Time
Description
This command is used to directly set the peak time in microseconds
for square wave pulsing. This will also set the Duty Cycle (DU) and
Frequency (FQ) accordingly based upon the Pulsing Base Time
(T1).
Command Syntax
T2 <NR1>
Example
T2 4000
This will set the pulse base time to 4000
µ
s. If T1 were 6000
µ
s, the
duty cycle (DU) would be 40% and frequency would be 100Hz.
Query Syntax
T2?
Returned Parameters TEXT ON: <NR1> us
TEXT OFF: <NR1>
TEXT Text Mode
Description
This command is used to turn on or off the descriptive responses that
are available on many queries.
Command Syntax
TEXT ON
TEXT OFF
Example
TEXT ON
This will turn on the descriptive responses.
TEXT OFF
This will turn off the descriptive responses.
Query Syntax
TEXT?
Returned Parameters Text On: TEXT ON
Text Off: 0 (meaning Off)
