TDE MACNO MINIOPD EXP, User Manual

Page: 110 / 124

110
7.4.2 VISUALIZATION OF THE INTERNAL DIMENSIONS (INT)
From INT You enter into the list of undermenu of the internal dimensions
pressing “S”. In the list you are moving with the keys “+” or “–” till that
appearing address of dimensions wanted visualize “d x x”; pressing “S”
disappears the address and appear the value of the dimension. From this
status You go back to undermenu list, repressing “S”, and go again to the
main menu repressing “S” twice in fast succession; from the menu and from
the undermenu. You return automatically to the status of rest after a time of
10 seconds.
FIG. 13
(Visualization of the internal dimensions INT)
7.4.3 ALARMS (ALL)
From ALL You enter into of undermenu list of the alarms pressing “S”. From
the corresponding undermenu with the keys “+” and “–” move all addresses
desired for the alarms; with this, in the box to the right, appears the status of
the alarm “H” if active, “L” if don’t. If the alarm has been disabled; in this
case too with the active status doesn’t appear any stop of the regulation,
the address of the alarm is preceded by the sign “–”.