Seite 15 von 45
The tab
(for THERAPY) has been touched to display it’s window.
The
Frequency value
entered last, or active in
any function, is
displayed
in this field.
Touch to display the
numerical block to
enter
a Frequency value
in the
operating range of the
device between 0.1Hz
and 15,000,000.9Hz.
Touch to
decrease
the actual frequency
value
in increments
of “DELTA F” set in
the window SETUP.
Touch to
start the
broad band SWEEP
.
A separate window is
displayed which will
be shown later.
For information only.
The “PULSE” feature
is OFF
. If it had been
set in the window
SETUP the pulse rate
would be shown here.
Touch to
display a
separate window
with alpha sorted
name lists
to
select from the
internal tables.
Touch to
enter
the
active frequency
into
a free position
of the
operating
memory
.
Touch to
start a
ZAPPER session
. A
separate window is
displayed which will
be shown later.
Touch to
increase
the actual frequency
value
in increments
of “DELTA F” set in
the window SETUP.
Touch to
send
the
active frequency
to the output ports
(the PowerPort has
a limited range).
The background of
the icon changes to
black and it’s label
from GO to STOP.
Touch to clear the
memory position
shown between the
arrow icon’s.
Touch to
switch to a
higher memory
position
which will
be shown between
the arrow icon’s.
Touch to
switch
to a lower
memory position
which will be
shown between
the arrow icon’s.
Touch to
activate the special
feature
“
S
weep
T
o
N
ext”. It can
be used between any two
adjacent frequencies stored in
the operating memory. It has to
be activated in the position of the
lower of the two frequencies. The
time assigned to this frequency
determines the duration of the
Sweep.
