Seite 6 von 45
Signals available on OUTPUT connector
Signal available on POWER PORT
Vpp
SINE
wave signal
10 V
Amplitude adjusted with
potentiometer
SQUARE FULL WAVE
signal
Switch in top position
Amplitude adjusted with
potentiometer
SQUARE DC-OFFSET
signal
Switch in bottom position
Amplitude of square wave signals in relation to position of potentiometer is linear!
CAUTION:
When using square wave signals, the output voltage (amplitude) must
be carefully adjusted to the user’s sensitivity. See chapter
Adjustment of amplitude
SQUARE DC-OFFSET
signal
Amplitude preset to 5Vpp
SQUARE DC-OFFSET
signal
Amplitude preset to 14Vpp
CAUTION:
Polarity of POWER PORT is
opposite of “OUTPUT” !!!
Any connection between the two output ports
causes a short which damages the device
and/or the power supply !!!!
