Seite 17 von 45
The tab
has been touched to display it’s window.
The frequency
value
sent from
the device during
a DIRP is
displayed here.
The horizontal line
can be moved vertically within the graph
field with the up and down arrows CL (
C
lipping
L
evel). All
values of the graph touching or passing this line can be
transferred for further use to the operating memory with a
touch on the icon “TRANS”.
Touch
GO
to
start
the D I R P.
The background of
the icon changes
to black and it’s
label from GO to
STOP.
(This picture shows
a DIRP in
progress.)
Touch to CLEAR
the graph field
without deleting the
data from the
operating memory
The resonance
feedback (MV) to
the frequency
value issued by
the device is
stored in the
operating memory
and displayed on
the graph.
The Conductivity Value (CV) in %
is displayed here. The distance of
the horizontal line from the x-axis
(CLIP=005) is shown on the right
and the Measured Value (MV)
underneath the CV.
“F MIN” and “F MAX”
set in window 1 of the
tab SETUP are
shown under the
horizontal axis of the
graph.
Touch to
TRANSFER
resonant
values selected with
the horizontal line
(CL) to the operating
memory.
Touch to REDRAW
the graph.
The sensitivity of the
analysis function can
be adjusted from the
default value of
“L”=Low to
“M”=Medium or
“H”=High
