Taylor K-8000, User Manual, Page: 61 / 100

3-35 TTi
®
Colorimeter User’s Manual
Part 3 Colorimeter Operation
Footer Options: Select using  ; then press ENTER .
ZERO
Zeros the instrument on a blank and displays zero.
READ
Reads the sample and displays result.
TIMER
Goes to a preprogrammed timer if specified in the test procedure.
Goes to a nonprogrammed timer that can be set by the user if a
timing step is not specified in the test procedure. (See Part 3, Test
Timers and Auto-Read Option.)
NEW
Ends test and returns to the current test menu.
AC
Goes to the Adjust Calibration screen and turns on the Adjust Cali-
bration feature (see Part 3, Adjust Calibration).
AC/OFF
Turns off the Adjust Calibration feature. Only available if AC is cur-
rently on (see Part 3, Adjust Calibration).
NEXT
Continues to the next test in a Series Test.
PREV
Returns to the previous test in a Series Test.
WL
Returns to the wavelength selection screen when in the Absor-
bance and % Transmittance modes (see Part 3, Absorbance and
Transmittance Tests).
TOOLS
Select TOOLS to access the Data Transfer and the User Timer modes. The Data Transfer mode allows the
instrument to communicate with a PC or laptop using the TTi
®
Colorimeter Series PC App . The PC App will
prompt the user when to select Data Transfer.
The user timer is a general-purpose timer that can be used for any reason. When the user timer expires, four
sets of five short beeps each will be heard. ( NOTE: The user timer beep can be distinguished from the test
timer beep. When a test timer expires, the device emits three sets of beeps. Each set consists of one long beep
followed by two short beeps.)