Taylor K-8000, User Manual, Page: 58 / 100

3-32 TTi
®
Colorimeter User’s Manual
Part 3 Colorimeter Operation
HOW TO PERFORM A SERIES TEST
Creating a series allows individual tests within this grouping to be performed in rapid succession without
having to exit between tests to select a new test from another menu. A total of 10 series can be created. These
will be stored in the ALL TESTS menu and can be added to the FAVORITES menu. Each series can contain
as many as 25 individual tests arranged in any preferred order. For detailed information about creating and
editing a series of tests, see Part 3, Edit Series.
In general, the steps required to perform a Series Test are the same as for an individual test with a few excep-
tions:
• Select a test menu (ALL TESTS, RECENT TESTS, or FAVORITES) that contains the series to be
performed.
• Select the series number (1–10) from the test menu.
• Confirm the series selection.
• Confirm the first individual test selection and sample cell size, and select a chemical form for expression
of test results.
• Prepare a blank and ZERO the Colorimeter.
• Prepare the sample and observe any timing steps.
• READ the sample.
• Continue to the next test in the series.
The following example provides detailed information about test screens and test options while showing you
how to perform tests in a series.
STEP 1
Select Start Test from the MAIN MENU using  ; then press
ENTER .
Select a test menu (ALL TESTS, RECENT TESTS, or FAVORITES)
containing the series to be performed using  .