Taxan KG-PS232Xh, User Manual

Page: 27 / 96

KG-PS232Xh/232X | KG-PV131X/131S User’s Manual
E-27
Basic Operation
Connecting Personal Computers and Video Equipment
To Output the External Output Signal of a Notebook Computer
When connecting a notebook computer, knowledge will be required for the cable
connection and notebook computer startup procedure as well as the operation
that follows notebook computer startup. Please consult the instruction manual
of your notebook computer or the on-line help while performing the following
procedure.
1.
Check whether a signal is being sent from the notebook computer to this
projector.
An indication appearing on the liquid crystal display of the notebook comput-
er does not necessarily mean that an external output signal is being output.
2.
When a signal is not being output from the notebook computer, take
steps to output an external output signal.
The output method of the external output signal will differ depending on the
personal computer manufacturer. See the table below for details.
Manufacturer Key
ACER Fn + F5
DELL Fn + F8
EPSON Fn + F8
FUJITSU Fn + F10
Hewlett-Packard Fn + F4
IBM Fn + F7
Lenovo Fn + F7
NEC Fn + F3
Panasonic Fn + F3
SHARP Fn + F5
SONY Fn + F7
SOTEC Fn + F3–F5
TOSHIBA Fn + F5
Note: The content of the table is current as of December, 2007.
When the liquid crystal screen of the notebook
computer and the projector image are displayed
at the same time, the projected image might not
be correct even though the liquid crystal screen
displays the correct image. Should this occur, stop
the simultaneous display of the notebook computer
and try the mode with external output only. Try an
operation such as that described in step 2 at the
left, and try closing the liquid crystal panel which
might result in external output only.
Note