Data Projector
E-22
3
Turn On the Power
Press the POWER/STANDBY button of the remote control or the projector and turn
on the power.
The indicator of the POWER/STANDBY button will change from the orange color of
the standby mode to (flashing) blue. See “Turning On the Power” for details about
when the power is turned on. See Page E-33.
4
The Video Is Projected
Language Settings
and other initial settings will be displayed only when the
power is turned on for the first time after purchase. See “Turning On the Power for
the First Time after Purchase” on Page E-34.
The factory default setting is for
Automatic Detection
be
On
. This will automati-
cally project the video when an input signal is detected.
When attempting to project video from a notebook computer, and video is not
projected, see “To Output the External Output Signal of a Notebook Computer”
on Page E-27.
•
Basic Operation
The Procedure from Projection to Turning Off the Power
The projector is equipped with a Quick-start function. The
Quick-start function is a function that projects the video a
short time after pressing the POWER/STANDBY button.
The video will be projected a little over ten seconds after
pressing the POWER/STANDBY button.
Technical Point
Summary of Contents for KG-PS232Xh
Page 96: ...2008 KAGA COMPONENTS CO LTD...
