Tatuus GB3 CHAMPIONSHIP, Technical Manual

Page: 43 / 80

Version 1.03 44
3.5.2
Pedals
The pedal box can be adjusted in position, five positions are available in the chassis, when pedal box is moved
backward the pedal rod have to be adjusted to reach master cylinder, here below the available options:
1.
Long rod (ref. 16-15-16-005): it has to be added to the AP rod, the total length of the rod must be
shorter than 330mm. The AP rod must be shorter than 100mm (max 60mm free thread).
2.
Medium rod (2x ref. 08-06-16-009) two aluminium rod 08-06016-009 can be stacked (it must be
carefully checked the planarity of the connection between the rod surfaces), the assembled rod is then
tightened over the AP rod, the total length of the rod must be shorter than 280mm. The AP rod must be shorter
than 100mm (max 60mm free thread).
3.
Short rod (ref. 08-06-16-009) one aluminium rod 08-06016-009 has to be added to the AP rod, the
total length of the rod must be shorter than 210mm. The AP rod must be shorter than 100mm (max 60mm free
thread).
4.
No extension rod: the original AP master cylinder rod can be kept, (overall length AP rod plus bracket
about 180mm)
(Replacement AP rods are ref AP 2142-22)