Tatuus GB3 CHAMPIONSHIP, Technical Manual

Page: 42 / 80

Version 1.03 43
3.5
C
OCKPIT
3.5.1
Controls and procedures
On the cockpit panels you can find:
•
[1] Main power switch: master switch is ON;
•
[2] Ignition switch: ignition coils, injectors and alternator are powered;
•
[3] Starter button (GREEN): starter motor is cranking (note that this button will crank the starter in any
condition but the engine will fire up only if Ignition is ON);
•
[4] Not operational
•
[5] FUEL button: fuel pump override.
All the switches are ON when UP.
The starter button [3] can be used to crank the engine and raise up the oil pressure only if ignition switch [2]
is off.
Before the engine start check to be in neutral gear, then push master switch ON [1], switch ON ignition [2],
press starter button [3].
To switch off the engine it is strongly recommended to turn ignition switch OFF [2], this procedure will allow
all the systems to complete the shutdown procedure.